Fence Installation Cost Guide
National average pricing by material, sourced from Angi, HomeAdvisor, and Forbes Home’s 2026 cost data — not a Costa Key quote. Your exact price depends on your yard, material, and site conditions, which we confirm during a free, no-obligation estimate.
Get Your Free Quote →2026 fence cost by material (national averages)
These figures come from Angi, HomeAdvisor, and Forbes Home’s published 2026 cost guides for materials and labor combined. They’re a starting point for budgeting, not a site-specific quote — regional labor rates, exact spec, and yard conditions all move the final number.
| Material | Typical range | Notes |
|---|---|---|
| Chain-link | $8 – $25 / linear ft | The most budget-friendly option; cost climbs with taller heights and vinyl coating. |
| Wood privacy | $10 – $45 / linear ft | Pressure-treated pine sits at the low end; cedar and board-on-board styles at the high end. |
| Vinyl privacy | $20 – $40 / linear ft | Higher upfront cost than wood, but little to no ongoing maintenance. |
| Aluminum ornamental | $20 – $30 / linear ft | Open picket profile; common for pool barriers and front yards. |
| Composite privacy | $11 – $45 / linear ft | Price scales heavily with height: roughly $11–$15/ft at 3–4 ft, up to $28–$45/ft above 6.5 ft. |
| Aluminum railing | $40 – $80 / linear ft | Higher per-foot cost than fencing due to post and hardware density. |
| Cable railing | $75 – $260 / linear ft | Stainless cable and hardware cost more than solid rail infill. |
| Pool fence / enclosure | $15 – $25 / linear ft | Typical full project averages around $4,000, ranging $1,100–$12,500 depending on size and material. |
| Automatic driveway gate | $1,900 – $6,000 / gate | Priced per gate rather than per foot; includes the operator and hardware. |
Sources: Angi, HomeAdvisor, and Forbes Home 2026 national cost data. Figures reflect materials and labor combined and will vary by region, exact height/spec, and site conditions.
What actually moves your price up or down
- Total length and height. Cost is largely linear-foot driven, so a longer perimeter or a taller fence (6–8 ft) costs more than a short 4 ft run, even in the same material.
- Gates. Walk gates and driveway gates are typically priced on top of the linear-foot rate, not included in it — and an automatic gate operator adds a separate cost entirely.
- Site access and terrain. Sloped yards, dense landscaping, or hard-to-reach lot lines add labor time regardless of material.
- Old fence removal. Tearing out and hauling away an existing fence is usually quoted separately from new installation.
- Wind exposure. A more exposed yard can call for closer post spacing and deeper footings, which adds material and labor beyond a standard install — see our wind-resistant fencing page.
- Permits. Permit fees are separate from installation cost and depend on your jurisdiction — see our fence permits page for how that works in Sarasota and Manatee County.
Why we don’t quote a flat price on this page
National averages are useful for budgeting, but they can be misleading applied directly to your project — regional labor rates, your exact yard, and the spec you actually want all move the number. We give every project a free, no-obligation walkthrough and written estimate rather than a phone-quoted price, so what you get quoted is what the project actually costs.
Fence Cost FAQ
How much does it cost to install a fence?
Nationally, fence installation runs roughly $8 to $45 per linear foot installed for most residential materials, according to Angi and HomeAdvisor’s 2026 cost data — chain-link at the low end, composite and premium wood styles at the high end. A typical 150-foot residential fence lands somewhere between $1,500 and $9,750 depending on material, height, and gate count. These are national averages, not a Costa Key quote; your exact price depends on your yard, material choice, and site conditions, which we confirm during a free estimate.
What is the cheapest fence material?
Chain-link is consistently the least expensive option, typically $8 to $25 per linear foot installed. Pressure-treated wood privacy fencing is the next most affordable solid-privacy option. Vinyl, aluminum, and composite cost more upfront but generally need less maintenance over the life of the fence.
Does fence cost include the gate?
Usually not as part of the per-foot rate. A standard walk gate is typically priced separately from the linear-foot fence cost, and an automatic driveway gate is its own line item entirely — nationally averaging $1,900 to $6,000 including the operator and hardware, per Angi’s 2026 data.
Does the cost include removing my old fence?
Not automatically. Removing and hauling away an existing fence is typically quoted as an add-on to a new installation. If you’re replacing a fence, mention the teardown when you request your estimate so it’s included in the quote rather than a surprise later.
Will permit fees add to the cost?
Possibly, depending on your project and jurisdiction. Permit fees are separate from installation cost and vary by county and city. See our fence permits page for how permitting works in Sarasota and Manatee County, and we’ll flag any permit requirement as part of your free estimate.
Why do wind-rated or hurricane-area fences cost more?
A fence built for a more exposed, windier yard often needs closer post spacing and deeper footings than a standard installation, which adds material and labor. See our wind-resistant fencing page for how wind exposure affects the build, not just the material choice.
Free Estimates Across Both Counties
Costa Key Fence installs fencing, gates, and railings throughout Sarasota County and Manatee County. Browse your city for local details, or request your free estimate below.
Request Your Free Quote
Fill out the form below and we'll get back to you within 24 hours with a personalized quote for your fencing project.
Address
1508 S Shade Ave, Sarasota, FL 34239
Phone
Service Area
Sarasota & Manatee Counties, Florida
Founded
Serving Sarasota & Manatee Counties since 2019